NanoEnTek EVE, Руководство пользователя

Страница: 9 / 45

EVE
TM
, Automatic Cell Counter ©2013 NanoEnTek Inc. 9
1.
After unpacking the instrument, place the instrument on a
flat, level, dry surface.
3.
Plug the power cord into the electrical outlet. Be sure to use
only the power cord supplied with your instrument. Powering the
instrument with an unapproved power cord may damage the
instrument.
5.
When the instrument is turned on, the Start Up screen is
displayed. Here you can proceed immediately to cell counting,
set up the instrument for cell or bead count, or adjust the screen
brightness.
Installation
Installing
EVE™
Automatic
cell counter
2.
Plug one end of the supplied
power cord into the EVE™. To the
other end attach the appropriate plug
adaptor, based on the electrical outlet
configuration in your country.
4. When you are ready to use, start the EVE™ by pressing the
Power button .