NanoEnTek EVE, Руководство пользователя

Страница: 20 / 45

20
Operation
Cell counting
12. The Calculator button allows you to quickly calculate
adjustments to the cell suspension to obtain a desired
concentration.
13. To count the cells in the other side of the slide (side B),
remove the EVE™ slide after side A is counted by pushing in the
slide slightly and then pulling the slide out. Turn the slide around
and reinsert into the slide inlet and repeat the procedure.
14. The EVE™ USB drive holds one set of data. To save your
data for future analysis or archiving, you must record the data or
save after each reading.
See page 21 for
Transferring data to a PC
.
15. After recording or saving the data, remove and discard the
slide appropriately as bio-hazardous waste.
16. At this point, the EVE™ is ready for another sample. If you
are not using the instrument, press the
Power button
to turn off
the instrument.
» If the touch screen is not responding, you can turn off the instrument by pressing
and holding the
Power button
for 4 seconds.