NANO NED 4L, Инструкция

Страница: 8 / 50

1.4 Safety precautions during operation
Warning: All responsibility for any damage or injury resulting from neglecting these
precautions, or non-observance of the normal caution and care required for installation,
operation, maintenance and repair, even if not expressly stated, will be disclaimed by the
manufacturer.
• Persons switching on remotely controlled machines shall take adequate precautions to ensure
that there is no one checking or working on the machine. To this end, a suitable notice shall be
affixed to the remote start equipment.
• Never operate the device in the presence of flammable or toxic fumes, vapours or particles.
• Never operate the device below or in excess of its limit ratings.
• Keep all bodywork doors and panels closed during operation. The doors may be opened for
short periods only, e.g. to carry out routine checks.
• People staying in environments or rooms where the equipment is operated shall wear adequate
personal protective measures, such as ear protection, safety goggles, etc.
• Periodically check that:
• All guards and fasteners are in place and tight.
• All hoses and/or pipes are in good condition, secure and not rubbing.
• There are no leaks.
• All external electrical leads are secure and in good order.
• Never remove or tamper with the safety devices.
• The electronic drain valve will only function when voltage is being supplied to the device.
• Do not use the test button for continuous draining.
• Do not use the electronic drain valve in hazardous areas (with potentially explosive
atmospheres).
Note: Also consult following safety precautions: Safety precautions during installation and
Safety precautions during maintenance or repair.
Note: The precautions apply to electrical devices.
Note: For precautions applying to the connected equipment, consult the relevant instruction
book.
Note: Some precautions are general and cover several machine types and equipment;
hence some statements may not apply to your device.
1.5 Safety precautions during maintenance or repair
Warning: All responsibility for any damage or injury resulting from neglecting these
precautions, or non-observance of the normal caution and care required for installation,
operation, maintenance and repair, even if not expressly stated, will be disclaimed by the
manufacturer.
• The use of personal protection equipment (P.P.E.) during installation and maintenance
operations is recommended.
• Use only the correct tools for maintenance and repair work.
• Use only genuine spare parts.
Instruction book
6 2920 7213 30