NANO NED 4L, Инструкция

Страница: 40 / 50

8 Optional equipment
8.1 Precautions for optional equipment
Danger: All responsibility for any damage or injury resulting from neglecting these
precautions, or non-observance of the normal caution and care required for installation,
operation, maintenance and repair, even if not expressly stated, will be disclaimed by the
manufacturer.
Note: Some precautions are general and cover several machine types and equipment;
hence some statements may not apply to your device.
Precautions
1. Make sure that all electrical wiring has been installed in compliance with the valid regulations.
2. Installation must always be performed by a qualified technician.
3. Installation must be carried out in compliance with the circuit diagrams and connection
drawings provided.
4. The electronic drain valve, the feed line and the discharge line must be correctly insulated to
prevent freezing and thus serious damage to the device or piping.
5. Do not switch off the heating if there is any likelihood of frost. There may still be condensate left
inside the Electronic Water Drain.
8.2 Heater
C683 Heater kit
Components
• Heater kit.
• Industrial connector type A, 2P+T field attachable.
• Screw M3x10 (x2).
Features
Instruction book
38 2920 7213 30