NANO NBP Series, Руководство по эксплуатации

Страница: 5 / 24

nano
pg. 5
Safe operating procedures:
1. Pressurize and depressurize compressed air SLOWLY! Always open air
valves slowly when pressurizing the air line system or equipment.
Replace air slowly when depressurizing your air system or equipment.
2. Circuit breakers, fusible disconnects, and wiring should conform to
national and/or local electrical codes. Make certain that the
electrical installation for this unit is performed by qualified
electrical personnel.
3. Only use original fuses for the rated voltage and current.
4. Shut down the unit in the correct recommended procedure.
Depressurize the unit and remove all electrical connections.
5. After shut down, put up warning notice to prevent the unit from being
switched “ON” accidentally.
6. Inspect all piping, hoses and connections. Make sure that all hoses are
in good condition and are rated for the correct working
pressure. Do not allow hoses to come into contact with oil,
chemicals, or sharp objects.
7. Secure condensate drain lines. Unsecured flexible drain lines
may whip violently under pressure and may cause bodily harm.
nano air dryers do not remove carbon monoxide and is not safe for human
respiration (breathing). Breathing air must be at least grade D quality as
described in compressed air and gas association (CAGI) commodity
specifications 67.1-1966. User may refer to OSHA 29 CFI 1910.134 for
special precautions and equipment suitable for breathing air applications.
nano disclaims any liability what so ever for loss, injury or damage.