NANO NBP Series, Руководство по эксплуатации

Страница: 14 / 24

nano
pg. 14
Electrical:
Make all electrical connections to the dryer as shown on the wiring diagram.
Special care must be taken in connecting the proper voltage as indicated on
the specification sheet and wiring schematic.
Exhaust:
If you intend to vent your exhaust with additional piping, the discharge
piping from the exhaust should not be piped upward without an arrangement
for removing trapped condensate. Make sure that you do not apply any back
pressure on this exhaust system.
Note:
It is mandatory that dryer be grounded. Use of your plants frame as
a ground may cause problems with the control.
A fused disconnect is not supplied with this equipment therefore one must be
supplied by customer. All electrical fuses, breakers, etc. should be correctly
sized .
nano is not liable for any code violations; component damage, downtime or
consequential damage related to customer supplied electrical components
and connections.