NANO 3 series, Руководство пользователя

Страница: 15 / 24

Page 15 17-110-0140
12.2. Dryer Start-up
• Ensure the purifier is securely hardwired into the power source.
• Connect all pipe work.
• Ensure the inlet operating pressure parameters are between 80 - 145 psig (5.5 - 10
barg).
• Ensure the inlet air temperature is between 35°F - 86°F (1.5 - 30°C).
• Slowly open the inlet valve until fully open and allow dryer to pressurize.
• Turn on the power to the dryer.
• Open the outlet valve.
• The dryer will display its status and commence normal operation.
Do not allow the dryer to flow air unless powered up, switched on and
cycling. Resulting effect could be bed contamination; requiring replacement
cartridges.
Ensure that the external silencers/mufflers are re-installed before
attempting to start the dryer.