32
General Fault Detection and Diagnosis
If the above faults can not be fixed after troubleshooting, please contact distributors or manufacturer for repair.
The light won't start up.
The fixture can run,
but can't be controlled.
OELD display is on but no light output.
Diagnosis
Fault Detection
The built-in fan doesn’t work.
1. Please check whether there is loose connection between the power
adapter and the power cable or the power adapter and the outlet.
2. Please check whether the voltage of power adapter is within designated
range.
3. Please check if the battery is installed properly when using an external
battery, and if the voltage/current of battery is within designated range.
1. Please check if the address code is properly set.
2. Please check if the DMX connection cable is connected properly for
DMX control solution.
COB or main board might be damaged.
Please check if the fan is in the "off" setting.
This manual has been compiled according to the rigorous testing of our company's products. Product designs are
subject to change without prior notice.
