30
Safety Precautions
1. Please open the package to check for damage caused in transit. Please do not use if there is damaged and contact
with the dealer or manufacturer as soon as possible.
2. Do not use a power cord with damaged insulation. Do not unplug hard or drag the power cord directly.
3. Make sure that the power supply voltage used matches the voltage specified by the light before installation.
4. Please turn the light off when you make cleaning or not using it.
5. Keep the light safely stored and away from children.
Notice
1. Please take down the COB protective cap before using the light.
2. Please do not look directly at the emitter when the light is on .
3. Please do not place any object on the light emitter or allow liquid to flow inside the fixture or the emitter.
4. Please wait 10 seconds to turn off the fixture after any paremeter setting in order to save it for future use.
5. Please do not place the fixure near flammable substances like alcohol or gasoline.
6. Please wipe off debris or dirty by using a cloth with clean water or neutral cleanser when cleaning the light.
7. The light should be safely operated where it won’t be at risk of getting wet or under extreme temperature. Please
make sure the ventilation fan is not blocked or obstructed.
8. Please do not attempt to repair the light fixture by yourself. Attempts to self repair will void warranty. Qualified
professionals should make maintenance under the conditions of strictly following the operating procedures
described in this manual.
9. Please ensure the vents would not be covered when using, to avoid heat dissipation, resulting in the light damaged.
When using the light for a long time, the temperature of the light surface will be high, please pay attention to
anti-scalding.
