ZA-4000 User’s Manual
λ
The software must be za4000.rmt when upgrading by FTP
λ
Do not try to turn off the Access Point, shutdown the computer or do anything else to the
Access Point until the Access Point finishes restarting!
Notice:
λ
In some cases, such as a major upgrade, you may need to erase the configuration and
manually reconfigure your CPE after upgrading it. Refer to the Guide included with the
software to find out if you need to reconfigure the CPE.
Backup/Restore Settings
There are two kinds way to backup or restore Access Point.
WEB
Figure 24Backup/Restore Settings
1. Click button to save backup file to hard disk.
2. Click Browser button to locate the backup file you want to retrieve and click retrieve button,
then the device will restart.
FTP
1. Login device by ftp.
2. Input command get za4000.cfg, it will be saved in current directory.
- 34 -
