ZA-4000 User’s Manual
λ
The both Access Points settings of Country/Region, Channel/Frequency and Security
should be the same.
λ
The WDS Mode can’t be used between two ZA-4000 or with other CPE with WDS
function.
5.
Use “Link Test” to test the signal strengthens of wireless network. At first, open “WDS
Settings” page, input the real space between Bridges. Then open “Link Test” page, check
those settings whether is right. If right.
Figure 16Link Test
Notice:
λ
For the accuracy of test result, you should make sure that the Link Test settings are right.
Click start button to begin test. The result will show bellow.
- 27 -
