ZA-4000 User’s Manual
WDS Mode
The device can connect to the remote AP with the WDS function.
Figure 15WDS Mode
WDS connection can be configured refer to the following steps:
1.
Change the
Operation Mode
to
WDS
2.
Input the MAC Address of the remote AP
3.
Select the right Channel/Frequency
Notice:
4.
Click
Apply
to make the configure work. Now the two devices have normally worked. You
can change settings account to your need. The detail about changing settings refer to
Set the
Basic Wireless Parameters
,
Security Setup
.
- 26 -
