NANAWALL WD65 OWNER’S MANUAL
9
DIAGRAM 2: WD65 SUGGESTED TYPICAL INSTALLATION
INWARD AND OUTWARD OPENING DETAILS
Suggested Typical Installation drawings shown are very general and may not be
suitable for any particular installation. Product placement, fasteners, flashing,
waterproofing,
sealant, trim
,
and other details for specific surrounding conditions must
be properly designed and provided by others.
Drawings not to scale.
Details shown are subject to
change without notice.
Note: Contact us for
detailed information.
OUTWARD OPENING PANEL
HINGED AT RIGHT SIDE JAMB
INWARD OPENING PANEL
HINGED AT RIGHT SIDE JAMB
STANDARD SILL
STANDARD WINDOW SILL
LOW PROFILE SADDLE SILL
FLUSH SILL
ALTERNATIVE - STANDARD
SILL WITH SUB-SILL
LOW PROFILE SADDLE SILL
For some level of water resistance, recommend the
following by others:
1. Remove the gasket covering inner water channel.
2. Provide necessary weepholes at bottom of
channel and an outside face of sill.
To adjust for
difference in floor
levels, sill flange
is bendable or
removable (in the
field.
