7-8 Steering Assy
7-8-1
Replacing the control
1.
Remove 4off M5x20 button head screws and pull forward the play panel
assy to gain access to the steering assy.
2.
Loosen the grub screw on the gear wheel and remove the gear wheel.
3.
Replace the control potentiometer.
4.
Replace the gear wheel and re-tighten the grub screw securely.
Note: When replacing the control potentiometer ensure that the locating tag of
the potentiometer is located in the hole in the mounting bracket and the pot
shaft is at
its mid travel before tightening the gear grub screw.
7-8-2
Replacing The Steering Wheel
1. Remove the centre cover of the steering wheel.
2. Remove three socket button heads (M6x16)
3. Pull off the steering wheel, then replace it with a new one.
Re-initialize the game (
see 5-4 Page 10 "Adjusting the Game"
) whenever
the game PCB board, ROM, Steering Assy, AB Pedal Assy or Controls are
replaced before the game is played.
16
Содержание Ridge Racer 2
Страница 1: ...2 Operators Manual RIDGE RACER Part No 90500075...
Страница 5: ...Page 2 MAJOR COMPONENTS 2...
Страница 21: ...Page 9 SCHEMATIC...
Страница 22: ...Page...