Page
5-4 Adjusting the Game After Replacing Parts (Initializing the Game)
Be sure to adjust the game with the following instructions below after
replacing any part. Otherwise, the game will not function correctly.
1.
Ensure that the accelerator and brake pedals are released and the
steering is in the centre.
2.
Slide the test switch to “ON” while pressing the service button. The
following screen appears on the monitor display.
3.
To zero the settings press the service switch.
4.
When each number on the right hand side of the items: STEERING, GAS
and BRAKE is about “0000”, the adjustments are complete.
5.
Set the test switch to “OFF” to return to the Game Screen.
The test switch must always be “OFF” during normal game mode.
ADJUST
STEERING
0000
GAS
0000
BRAKE
0000
10
Содержание Ridge Racer 2
Страница 1: ...2 Operators Manual RIDGE RACER Part No 90500075...
Страница 5: ...Page 2 MAJOR COMPONENTS 2...
Страница 21: ...Page 9 SCHEMATIC...
Страница 22: ...Page...