NAMCO Air Combat, Руководство оператора

Страница: 7 / 68

4-2 Attaching the Cockpit Cabinet to the Monitor Cabinet
4-Z-l Attaching the Interconnect
B
OX
to the Monitor Cabinet
a. Remove the interconnect metal box cover by removing the six
button head screws.
b . Attach the interconnect box to the monitor cabinet lower front panel
by inserting four (4)
bolts through the box holes into the
monitor cabinet, and tighten them.
c. Carefully pull the two (2) six-position and two (2) three-position
molex connectors game harness out through the monitor
and
interconnect box holes.
Attaching the Interconnect Box to the Cockpit Cabinet
a. Roll the monitor cabinet to its intended operating area and place in
position.
b.
Roll the cockpit cabinet close to the interconnect box.
c. Attach the interconnect box to the cockpit cabinet lower front panel
by
inserting four (4) bolts through the box holes into the cockpit
cabinet, and tighten them.
d . Carefully pull the two (2) six-position and two (2) three-position
molex connector game
harness
out through the cockpit cabinet and
interconnect box holes.
e. Connect the four (4) molex connectors together. Make sure that
the
wire colors match.
Lower the eight (8) leg levelers of the game and adjust all leg levelers
until the game is stable and rests firmly on the floor.
g. Reinstall the interconnect cover.
Attaching the Monitor Marquee to the Monitor Cabinet
1 . Remove four (4) bolts, two (2) on each end of the bottom of the
marquee box.
2 . Remove four (4) bolts, two on each end of the top of the monitor
cabinet.
3 . Install two (2) metal brackets on the marquee box holes.
4 . Connect three-position molex marquee connector with the monitor
connector.
Install and secure
the
marquee
box to the
monitor cabinet
with the
bolts.
Setting Game Options
Refer to Section 5 of this manual. The Service Panel and Service
located inside the
Coin
Door.
4