NAMCO Air Combat, Руководство оператора, Страница: 15 / 68

B
E
SURE TO UNPLUG THE AC POWER BEFORE
CONDUCTING ANY MAINTENANCE PROCEDURES.
9 . To reinstall, fit the on their respective cage rails and firmly insert them,
making sure that their edge connectors are properly seated with
the
internal
connectors.
10. Resecure the white PCB retaining latches.
11. Reinstall the cover by resecuring the four head screws, making
sure to reconnect the Board connector to the PCB.
12. Push the tray back into the base cabinet.
13. Reattach
the two
bolts
securing the tray.
7-3 Replacing the Lamps
7-3-l Replacing Cockpit Fluorescent Lamp
Refer to Section 9-2 for illustration
a. Remove the screws securing the front cover on the cockpit assembly.
b . Remove the fluorescent lamp from its holders by rotating tube and
pulling outward.
c. Replace with a new watt fluorescent lamp.
d . Reinstall the front cover in its original position.
7-3-2 Replacing Fluorescent Lamp of Marquee Assembly
Refer to Section 9-3 for illustration
a. Remove the three (3) bolts securing the Marquee Signboard top mold-
ing, and remove it.
b . Slide the acrylic Marquee panel up and lift out.
c. Remove the defective fluorescent lamps (there are two (2) lamps)
from its holders by rotating tube and pulling outward.
d . Replace with a new watt fluorescent lamp(s).
e. Reinstall
the
Marquee Sign and top molding in their original positions.
7-3-3 Replacing Cockpit Incandescent Lamp
Refer to Section 9-2 for illustration
a. Remove the four (4) screws
securing
the cockpit indicator panel, and
remove it.
b . Replace the defective GE bulb(s) by pulling forward socket.
c. Replace the indicator
panel.
1 2