NAMCO Air Combat, Руководство оператора

Страница: 41 / 68

6. TESTING
Power Switch
Be sure to connect the power cord to an AC outlet and turn the power on. The
power switch is located in the rear lower left side of the main cabinet.
6-2 Adjustment Switches
Open the upper coin door to gain access to the service panel.
TEST CREDIT VOLUME
SWITCH SWITCH
Credit switch
61, SERVICE PANEL
This switch is used to increase the number of credits without activating the
coin counter.
Test switch
Pressing this switch puts the game into the test mode, and also advances
through the test mode functions. The test mode allows you to check that all
game elements are functioning properly.
Volume control
Rotate the volume control to adjust speaker sound level for your location.
Test Mode
The test mode is started by pressing the test switch on the service panel. By subse-
quent pressing of the test switch, the various tests described below are performed:
6-3-l Score Light Emitting Diode Displays (1st press of Switch)
This tests the LED lighting and sequencing of the two score displays. The
in each of the two windows will continue to cycle until the Test
Switch is pressed again.
a. HIT SCORE -the number of times a valid hit on one of the crabs is
recorded. When struck with the mallet, each crab will register only
one hit per “run down the track” no matter how many times it is struck.
b . HI SCORE -the highest score (crab hits) registered by any player
since the last time power was turned on. Maximum is 99.
7