![background image](http://html1.mh-extra.com/html/namco/ace-driver-deluxe/ace-driver-deluxe_operators-manual_3156876028.webp)
Page
23
6-2. Sign Assembly
6-2-1.
Replacing the Fluorescent Tube and Reflector Lamp
1)
Remove the two security screws (M5x12) and remove the acrylic retainer (B).
2)
Remove the four Security screws (M5x12) and remove the acrylic retainer
(C).
3)
Pull the acrylic sign forward to remove it.
4)
Replace the fluorescent lamp 4ft..
5)
Unscrew the reflector lamp (240v 25w E14 only) to the left to remove. Refit
by screwing the lamp to the right. (
Warning: Make sure the lamp is not hot
before touching it.)
6-2-2.
Replacing the LED
Drive PCB
6)
Remove the four
security screws
(M6x16), and remove
the sign board.
7)
Disconnect the
connector.
8)
Carefully close the
support locking ramp
with pliers, and gently
remove the board
from each support in
turn. Replace the
board by pushing
gently pushing the
board on to each
support.
Содержание ACE DRIVER DELUXE
