![background image](http://html1.mh-extra.com/html/namco/ace-driver-deluxe/ace-driver-deluxe_operators-manual_3156876052.webp)
Page
47
7. TROUBLESHOOTING
DANGER:
To avoid injury, always turn the main power OFF, before carrying out
any checks or adjustments.
Check the following whenever there is a problem with the machine.
1)
The machine is requires a mains supply of 220-240volt AC. If there are several
high current devices (air conditioners, large rides or other large machines etc.)
connected to the same power supply, the power supply may fluctuate due to
power surges, and cause game malfunction.
Each machine requires a maximum of 8amps, Ensure an adequate power
supply to prevent an overload and possible fire risk.
2)
If the machine fails to work even though the power is ON, try turning the power
off and back on. If the machine still fails to work, check the mains in fuse.
3)
If the seat assembly does not move even though game play is possible on the
screen, check that the seat shipping brackets have been removed, the motor
switch in the under base is turned on, and the condition of the drive castor.
Check the drive castor according to
section 6-9
, "Handling the Drive Castor
Wear" (page 44).
4)
The game will not operate correctly if it has not been initialized after replacing
the game PCB, ROM, or control pots. Adjustment should be performed
according to
section 5-5
, "Adjustment After Replacing Parts" (page 21).
5)
Check all wiring for loose connections.
6)
Dirt and dust on the game PCB, steering PCB, drum motor drive PCB, or
monitor PCB, could cause a malfunction, so all PCB's should be kept clean.
7)
When checking electrical problems, refer to the wiring diagrams, and make sure
that the connectors and wire colours are correct.
•
If none of the items 1-7 above seem to be the cause of the problem, or the
problem is not cured, contact your dealer.
•
Repairs to the PCB should be carried out by your dealer. NEVER perform a
continuity check on the PCB with a test meter, as the internal voltage of the
meter could cause damage to PCB components.
•
When sending a part for repair, clearly describe the problem and ensure that the
part is properly packed in a sturdy container to prevent damage in transit.
Содержание ACE DRIVER DELUXE
