![background image](http://html1.mh-extra.com/html/namco/ace-driver-deluxe/ace-driver-deluxe_operators-manual_3156876042.webp)
Page
37
6)
Remove the two security screws (M5x25) and two Whizz nuts (M5) from the
upper part of the removed seat section, and remove the seat stay from the
seat.
7)
When doing this, take care not to lose the washers.
6-6-2.
Installing the Seat
1)
Temporarily fasten the seat stay to the seat (
Refer to 6-6-1, step 6)
.
2)
Install the seat section to the seat.
3)
Temporarily fasten the seat to the seat holder, and the seat stay to the rear
board.
4)
Secure the seat making sure that the seat line is parallel with the seat
holder.
5)
Tighten all of the screws in the seat and seat
stay.
6)
Install the speaker cover.
7)
Install seat side A, seat side B, seat back A,
and the headrest, following the reverse
procedure of
section 6-6-1 steps 1-3.
Содержание ACE DRIVER DELUXE
