SADDLE
50
Clamp with clamp screw
1
1
Clamp with clamp screw
Fig. 11:
Adjusting the saddle height (clamp with clamp screw)
1. Unscrew the clamp screw in an anti-clockwise direction until you can move the saddle
in the seat tube.
2. Adjust the seat post to the required height.
-
When doing this, observe the minimum insertion depth of the saddle.
3. Align the saddle in a straight line with the frame once you have adjusted it to the correct
height.
4. To secure in the adjusted position, tighten the clamp screw in a clockwise direction.
-
Note the torque of the clamping screw
5. Check if you can rotate the saddle.
-
If you can rotate the saddle, check the seat post clamp.
28.2
Adjusting the saddle position
1
Max
Max
1
Screws
Fig. 12:
Adjusting the saddle position
1. Release the screws on the seat post in an anti-clockwise direction.
2. Tilt and move the saddle to the desired position.
-
Observe the marks (Max) for the clamping range.
3. To secure in the adjusted position, tighten the screws on the seat post by turning in a
clockwise direction.
-
Note the torque of the screws
4. Check if you can rotate the saddle.
-
If you can rotate the saddle, please contact your specialist dealer.
