27
BEFORE PUTTING THE BIKE INTO SERVICE
Brakes:
• Check one after the other the front and rear wheels to ensure they lock properly when
you pull on the corresponding brake lever.
Gear shift system:
•
Lift the rear part of the bike so that you can move the rear wheel and use the pedals to
set the rear wheel gently in motion.
• Shift through all the gears: Shifting should be easy; there should be no blockages or
unusual noises.
Frame, fork and seat post:
• Check components for damage and signs of wear such as cracks, deformation or colour
changes (visual inspection).
Quick-release devices:
• Check whether the quick-release clamps are securely fastened and closed.
• Check whether the initial tension of the quick-release clamps is sufficient.
Screw and plug connections
• Check whether the screw and plug connections are securely closed (visual inspection).
Pedal drive:
•
Lift the rear part of the bike so that you can move the rear wheel and use the pedals to
set the rear wheel gently in motion.
• Check whether the pedal drive is working properly and is securely fastened.
Handlebar and handlebar stem:
• Check whether the handlebar and handlebar stem are securely mounted in their
attachments and cannot move.
• Check components for damage and signs of wear such as cracks, deformation or colour
changes (visual inspection).
Tyres:
• Check whether the tyre pressure is sufficient.
• Check whether there are any cracks or foreign objects on the tyres.
Rims and spokes:
• Check the rims for damage and signs of wear such as cracks or deformation (visual
inspection).
• Check whether the spokes are evenly tightened.
