SHOUT nano User Guide Version A
Document Number: 451-92681-001A
24 of 60
4
Q
UICK
S
TART
Before use, airtime must first be purchased from NAL Research or from any of Iridium certified
airtime resellers. The SHOUT nano’s International Mobile Equipment Identification (IMEI)
number must be registered by an airtime reseller to “point” to a NOC server. To learn how to
operate the SHOUT nano as a messaging device, read the entire user guide. However, as a
tracking device, you can quickly set up the SHOUT nano with just three simple steps:
1.
Turn the SHOUT nano on by holding down the Power/Enter button
for about two
seconds.
2.
Go to the
Report Rate
menu to set the reporting frequency.
3.
Go to the
Track On/Off
menu
to enable tracking. The SHOUT nano is now in
tracking mode and is ready to send position reports at the rate chosen in step 2. No
further action is required. The unit automatically goes to “sleep” in between reports.
IMPORTANT: NAL Research can enable the SHOUT nano for use on the DoD EMSS Gateway.
However, accessing the EMSS Gateway is not authorized until the SHOUT nano is provisioned
(signed up for airtime). Unauthorized attempts to access the EMSS Gateway will result in
immediate disabling of the offending device, which must then be returned to NAL Research for
repair. Please see webpage
for more information regarding DoD EMSS
service provisioning.