A3LA-R-MIL-MOD User Guide Version B
Document Number: 451-93156-001A
115 of 159
“CS” CNTRL Surface (Enable/Disable Phone Lock feature). The current Phone
Unlock Code is required as <passwd>.
“SC” SIM: Activate/Deactivate SIM card PIN Code, in which the SIM asks
password in ME power-up. The PIN code is required as <passwd>.
"FD" SIM fixed dialling memory feature (PIN2 is required as <passwd>)
"AO" BAOC (Bar All Outgoing Calls) (refer GSM 02.88 [4] clause 1). The Call
Barring password is required as <passwd>.
"AI" BAIC (Bar All Incoming Calls) (refer GSM 02.88 [4] clause 2). The Call Barring
password is required as <passwd>.
"AB" All Barring services (refer GSM 02.30 [5]) (applicable only for <mode>=0).
The Call Barring password is required as <passwd>.
Note: Several GSM standard facility codes including the following are NOT supported:
"OI" BOIC (Bar Outgoing International Calls) (refer GSM 02.88 [4] clause 1). All
Iridium calls are International, so this facility should not be exercised by a
user interface.
"OX" BOIC-exHC (Bar Outgoing International Calls except to Home Country)
(refer GSM 02.88 [4] clause 1). All Iridium calls are International, so this
facility should not be exercised by a user interface.
"IR" BIC-Roam (Bar Incoming Calls when Roaming outside the home country)
(refer GSM 02.88 [4] clause 2). In Iridium it is not possible to roam (there
is only one “home country”), so this facility should not be exercised by a
user interface.
"AG" All outGoing barring services (refer GSM 02.30 [5]) (applicable only for
<mode>=0). This subgroup of services cannot be addressed; the user
interface should just use “AB”.
"AC" All inComing barring services (refer GSM 02.30 [5]) (applicable only for
<mode>=0). This subgroup of services cannot be addressed; the user
interface should just use “AB”.
<mode>:
0
Disable (Deactivate)
