EN
WWW.NIKOLAOUTOOLS.GR
4
ENVIRONMENTAL DISPOSAL
In order to avoid damages on transportation, the tool has to be delivered in solid packaging. Packaging as well as the unit and accessories are made of
recyclable materials and can be disposed accordingly. The tool's plastics components are marked according to their material, which makes it possible to remove
environmental friendly and differentiated because of available collection facilities.
Only for EU countries
Do not dispose of electric tools together with household waste material!
In observance of European Directive 2002/96/EC on waste electrical and electronic equipment and its implementation in accordance with
national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible
recycling facility.
TROUBLESHOOTING
In most cases, you will be able to troubleshoot problems easily by yourself.
Before any attempt to repair the device, ensure that the device is turned off and that the plug is removed from the socket.
Attention: To avoid damage and to minimize the risk of electrocution, electrical problems must only be repaired by authorized repair personnel.
Problem
Causes
Solution
The pump fails to operate.
1. No voltage.
2. Excessively high liquid temperature is causing
motor overheating.
3. Foreign body obstruction.
4. The residual current circuit starts up the breaker.
5. Motor fault.
1. Check the power cable, plug, socket and
fuse.
2. Lower the temperature of the liquid that
is being pumped.
3. Clean filter.
4. RCCB activation. If RCCB starts again,
contact a qualified electrician.
The water pump fails to
draw water regardless of
its operation.
1. Obstruction in the suction inlet.
2. The pump has sucked in air.
3. The pump is blocked by foreign body.
1. Remove blockage.
2. Ensure the joints are airtight.
3. Clean filter.
Excessively low hydraulic
head.
1. The pressure pipeline has excessively small
diameter.
2. The pressure pipeline is blocked.
3. The suction inlet is obstructed.
4. The pressure pipeline is kinked.
5. The pressure pipeline is not tight.
1. Apply the pressure pipe which has a large
diameter.
2. Remove blockage.
3. Clean the suction inlet.
4. Straighten the pressure line.
5. Seal the pressure pipeline and screw the
threaded connection.
The pump makes
excessive noise during
operation.
1. The pump has sucked in air.
1. Ensure that there is enough liquid.
2. Ensure the joints are airtight.
Содержание PRO NP2035
