Nakayama PB6500, Руководство пользователя

Страница: 23 / 34

- 5 -
•
THINGS TO CHECK BEFORE USING YOUR BRUSHCUTTER
a. Before beginning work, look around carefully to get a feel for the shape of the land,
or grass to be trimmed and whether or not there are any obstacles which might get
in the way while working, and remove any obstacles, which can be cleared away.
b. The area within a perimeter of 15m of the person using the brush cutter should be
considered a hazardous area into which no one should enter while the brush
cutter is in use, and when necessary yellow warning
rope, warning signs should be placed around the work
area. When work is to be performed simultaneously by
two or more persons, always check the presence and
locations of others so as to maintain a distance
sufficient to ensure the safety of each person.
c. Make sure that there are no loose screws or bolts, fuel
leaks, ruptures, dents, or any other problems which
might interfere with safe operation. Be especially
careful to check that there is nothing wrong with the
blades or with the joints by which the blades are
attached to the brush cutter.
d. Never use blades that are bent, warped, cracked,
broken or damaged in any way.
e. Always keep the blade sharp.
f.
Filling the cutting edges, keep the end corner sharp
and round the root of the edge.
g. Check the bolt that fastens the blade and be sure the
blade turns smoothly without abnormal noise.
•
NOTES ON STARTING THE ENGINE
1. Take a careful look around to make sure that no obstacles exist within a perimeter
of 15m or less around brush cutter.
2. Place the body of the brush cutter onto the ground
in a flat clear area and hold it firmly in place to
ensure neither the blades nor the throttle come
into contact with any obstacles when the engine
starts up.
3. Place the throttle into the idling position when
starting the engine.
4. After starting up the engine, if the blades continue
to rotate even after the throttle has been moved fully back, turn off the engine and
check the throttle wire and other parts.
•
KICKBACK SAFETY PRECAUTIONS
"
A dangerous reaction may occur when the spinning blade contacts a solid object
in the critical area. It is called Kick back. As a result. The operator can lose control
of the unit, which can cause serious or fatal injury.
Avoid kickback; observe the safety precautions below strictly.