Nakayama PB6500, Руководство пользователя

Страница: 22 / 34

- 4 -
take 10-20 minutes of rest between work sessions. Also try to keep the total amount
of work performed in a single day under 2 hours or less.
g. Be sure to keep this manual handy so that you may refer to it later whenever any
questions arise.
h. Always be sure to include this manual when selling, lending, or otherwise
transferring the ownership of this product.
i. Never allow children or anyone unable to fully understand the directions given in this
manual to use this brush cutter.
•
WORKING GEAR AND CLOTHING
A. When using your brush cutter, you should wear proper
clothing and protective equipment as follows:
1) Helmet
2) Protective goggles or face protector
3) Thick work gloves
4) Non-slip-sole work boots
5) Ear protectors
B. Carry the following items with you:
1) Attached tools and files
2) Properly stored extra fuel
3) Spare blade
4) Notifications for your working area (Tape, Warning
signs)
5) Whistle (for communication or emergency)
6) Hatchet or saw (for removal of obstacles)
C. Never use your brush cutter when wearing pants with loose cuffs, when wearing
sandals, or when barefoot.
•
WARNING - HANDLING OF FUEL
a. The engine of this product is designed to run on a mixed fuel
which contains highly flammable gasoline. You should never
store cans of fuel or refill the fuel tank in any place where there
is a boiler, stove, wood fire, electrical sparks, welding sparks,
or any other source of heat or fire which might ignite the fuel.
b. Smoking while operating the brush cutter or refilling its fuel
tank is extremely dangerous. Always be sure to keep lit cigarettes away from the
brush cutter at all times.
c. When refilling the tank always turn off the engine first and take a careful look
around to make sure that there are no sparks or open flames anywhere nearby
before refueling.
d. If any fuel spillage occurs during refueling, use a dry rag to wipe up spills before
turning the engine back on again.
e. After refueling, screw the fuel cap back tightly onto the fuel tank and then carry
the brush cutter to a spot 3m or more away from where it was refueled before
turning on the engine.