Nakanishi E2530 SYSTEM Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 28

Nakanishi E2530 SYSTEM Скачать руководство пользователя страница 3

2

1

■Read these cautions carefully and only use in the manner intended.
■Safety instructions are intended to avoid potential hazards that could result in personal injury or

damage to the device. Safety instructions are classified as follows in accordance with the
seriousness of the risk.

Thank you for purchasing the Ultra-Precision, High-Speed spindle system, E2530. The E2530 System
was designed for use on CNC lathes, robots, NC lathes and special purpose machines. The motor,
spindle and control unit are designed to work as an integrated system capable of 5,000-30,000min

−1

.

This system utilizes air to cool the motor and protect the spindle, please use an airline kit to ensure
clean, dry, properly regulated air is supplied to the motor and spindle. The E2530 system is capable of
being used with coolants and cutting lubricants.
Please read this Operation Manual carefully prior to use.

！

①

②

③

④

⑤

⑥

⑦

⑧

！

！

！

①

②

③

④

⑤
⑥

«
1
2
3
4
5
...
»

Содержание E2530 SYSTEM





























Отзывы:

Нет отзывов