13
English
If the Air Filter or Regulator are damaged, all components are replacable by the end-user.
(Refer to Table 2 and Table 3).
Table 2
Name
Model
Manufacturer
①
Air Filter
M2000 - 8 - W - S
CKD
②
Regulator
R2000 - 8 - W
Table 3. Air Filter Replacing Optional
Name
Model
Manufacturer
Air Filter Bowl Assy
(Polycarbonate Bowl with Manual Cock)
F2000 - W - BOWL
CKD
Air Filter Consumable Part Kit
( The set of the O-Ring, Mantle and Bowl O-Ring.
）
M2000 - KIT - S
8
. OPERATION
Bowl
Drain Outlet Port
Drain Valve
S : Stop Draining
O : Draining
Upper Limit
S
O
Fig. 2
8 - 1 Air Filter (Fig. 2)
Lock
Release
‚0
‚4
‚2
1‚0
MPa
‚8
‚6
L
H
Regulator Knob
Pressure Gauge
H : Increased
L : Decrease
Fig. 3
The water, dirt and debris are separated from the
compressed air.
The separated debris is collected in the Bowl.
8 - 2 Draining (Fig. 2)
＜
To divert the drain to another location
＞
Connect a hose with a
ȭ
6mm I.D. (Not included / provided
by the end-user.) to the Drain Output Port and divert to
another location.
Opening and closing the Drain Valve.
(DO NOT allow liquids and / or debris to exceed the Upper
Limit as shown in Fig. 2.)
O direction
：
Draining.
S direction
：
Stop Draining.
8 - 3 Regulator (Fig. 3)
＜
Lock and Release of the Regulator Knob
＞
Regulator Knob is equipped with Lock mechanism.
Release
：
Pull the Regulator Knob OUT to unlock.
Lock
：
Push the Regulator Knob IN to the Lock
position.
＜
Adjusting Air Pressure
＞
Turn the Regulator Knob while watching Pressure Gauge
increase or decrease.
H direction
：
Air pressure is increased.
L direction
：
Air pressure is decreased.