Page 13 of 24
9/18 IOM-FFDINST
Nailor Industries Inc. reserves the right to change any information concerning product or specification without notice or obligation.
CONTROLS
The fan filter unit can be controlled through various inputs.
1.
Local potentiometer control.
– Adjust airflow from the face.
– Adjust flow from back of unit (disabled if face control present).
2.
Individual unit wall mounted control (must be determined before ordering).
3.
0 – 10 V / 0 – 5 V DC Control.
4.
0 – 20 mA / 4 – 20 mA Control.
5.
Full range of network controls including connection to BAS / BMS through MODBUS RTU RS 485 control.
– BAC Net IP, BACNet MS / TP, & LON Works available with additional hardware.
Additionally, monitoring and controls of the fan filter unit can be done through closed loop control from sensors such as
pressure transducers, thermostats, partical counters, etc.
This manual will give basic information on how to connect controls and sensors to the unit. For more details refer to the
instructions included with the controller or sensors.
