Nailor 1210SS Скачать руководство пользователя страница 43

Страница: 43 / 43

SCHEDULE TYPE:
PROJECT:
ENGINEER:

CONTRACTOR:

DATE

B SERIES

SUPERSEDES DRAWING NO.

12 - 29 - 17

FD - ACC

4 - 28 - 14

MLS-300-3

Nailor Industries Inc. reserves the right to change any information concerning product or pricing without notice.

Refer to manufacturer’s submittal and installation and

operating manual for complete details and wiring diagrams.

APPLICATION:

When ordered with the MLS-300 Position Indicator Switch Pack, Nailor combination fire/smoke and smoke dampers that utilize

factory installed Belimo or Honeywell fire/smoke actuators will be supplied as standard with an actuator that has an integral internal

mounted switch pack. The auxiliary switches provide an on/off signal at two points in the actuator stroke and this signal can be

routed to a Fire Fighter’s Smoke Control Station for remote open/closed damper position status in Smoke Control Management

Applications. Alternatively, they may be field wired to a local accessible damper

control panel (Nailor DCP16). Both provide a means to cycle test the damper as

part of a scheduled building maintenance program.

ELECTRICAL SWITCH RATINGS:
Honeywell:

Models MS4104F1210, MS4109F1210, MS4604F1210, MS4609F1210:

Ratings (maximum load): 120 VAC/24 VDC, 3A resistive

Settings (fixed): 7° nominal stroke, 85° nominal stroke

Model MS8104F1210, MS8109F1210:

Ratings (maximum load): 24 VAC/DC, 3A resistive

Settings (fixed): 7° nominal stroke, 85° nominal stroke

Model MS4120F1204, MS4620F1203, MS8120F1200:

Ratings (maximum load): 250 VAC, 5A resistive

Settings (fixed): 7° nominal stroke, 85° nominal stroke

Belimo:

Model FSTF120-S, FSTF24-S, FSTF230-S:

2 x SPST 3A resistive, 0.5A inductive @ 120 VAC,

Settings (fixed): One switch at 10°, one switch at 80°

Models FSLF24-S, FSLF120-S, FSLF230-S:

2 x SPST 3A resistive, 0.5A inductive @ 120/250 VAC,

1mA @ 5 VDC,

Settings (fixed): One switch at 10°, one switch at 85°

Models FSNF24-S, FSNF120-S, FSNF230-S:

2 x SPDT 7A resistive, 2.5A inductive @ 120/250 VAC,

Settings (fixed): One switch at 10°, one at 85°

Model FSAFA24-S, FSAFA120-S, FSAF230A-S:

2 x SPST 6A resistive, 2.5A inductive @ 120/250 VAC,

Settings (fixed): One switch fixed at 10°, one at 85°

Model FSAFB24-SR-S:

2 x SPST 3A resistive, 0.5A inductive @ 120/250 VAC,

Settings: One switch set at + 10°, one adjustable from 10° to 90°

Fig. 1 -

Typical Honeywell Fire/Smoke Actuator

with auxiliary switches (MLS-300)

POSITION INDICATOR PACKAGE

FOR COMBINATION FIRE/SMOKE AND SMOKE DAMPERS

FOR USE WITH BELIMO AND HONEYWELL ACTUATORS

MODEL: MLS-300

Fig. 2 -

Typical Belimo Fire/Smoke Actuator

with auxiliary switches (MLS-300)

Содержание 1210SS












































Результаты поиска

Содержание 1210SS

Отзывы:

Бренды по названию

Популярные бренды

Nailor 1210SS, Руководство пользователя

Результаты поиска

Содержание 1210SS

Отзывы:

Бренды по названию

Популярные бренды