English
User's Manual
of GNF001
Version 1, July 2023
- 13 -
The power cord of the centrifuge should use a separate power socket, which must
be well grounded. Confirm that the power cord used by the centrifuge meets the
safety specifications of the country and region where it is located. The power voltage
and frequency applicable to the centrifuge should meet the requirements specified in
this manual or the specifications marked on the centrifuge nameplate. Please use the
power cord provided with the machine, connect it correctly to the machine power
socket, and connect it firmly to the network power supply. When the power switch is
closed, it is "|", and when the power switch is disconnected, it is "O".
5.Operating Instructions
1.1
Introduction to Control Panel and Display Interface
Figure 4: Schematic diagram of control
panel/display interface
Figure 4 illustrates the introduction of the control panel/display interface:
1. Door opening button
2. Stop/Start keys
3. Instantaneous centrifugal key (Flash)
4. Parameter adjustment knob key
5. Speed/relative centrifugal force setting key, ToggleKeys
6. Turn number setting key
7. Centrifuge time: Set key in hours/minutes/seconds
8. Program selection: rotor number, lifting speed
9. Prefabricated cold function