NAD M17 Скачать руководство пользователя страница 36

Страница: 36 / 38

OVERALL SPECIFICATIONS

Line Level Input

Input impedance (R and C)

56 kΩ + 220 pF

Input sensitivity

40 mV (ref. 500 mV out)

Maximum input signal

>8 Vrms

Signal/Noise ratio, A-weighted

>90 dB (ref. 500 mV in 500 mV out,

volume set to unity gain)
>80 dB (ref. 2 V out, Volume maximum)

Channel Separation

>70 dB (ref. 1 kHz/10 kHz)

Frequency response

±0.3 dB (ref. 20 Hz - 20 kHz, Tone Active)
±0.3 dB (ref. 20 Hz - 20 kHz, Tone Defeat)

Frequency response (subwoofer out)

10 - 200Hz (ref. -3 dB)

Output

Maximum output level

>8 Vrms into 600 Ω

THD (CCIF IMD, DIM 100)

<0.005% (ref. 20 Hz - 20 kHz, 2 V out)

XLR

>2 Vrms

Standby mode

<0.5 W

Tone Controls

Treble

±10 dB at 10 kHz (ref. 2V in 2V out)

Bass

±10 dB at 100 Hz (ref. 2V in 2V out)

Connections

HDMI

Up to 1080p

Optical

3 Vpp

Coaxial

0.5 Vpp

Ethernet

RJ45 10/100 Ethernet Tx

DIMENSION AND WEIGHT

Unit dimensions (W x H x D)

435 x 156 x 386 mm

17 1/8 x 6 3/16 x 15 1/4 inches

Shipping weight

17.5 kg (38.6 lbs)

* - Gross dimension includes feet, volume knob and extended rear panel terminals.

Specifications are subject to change without notice. For updated documentation and features, please

check out www.NADelectronics.com for the latest information about M17.

Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380;5,978,762; 6,226,616;

6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S. and worldwide patents issued &

pending. DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Master Audio

Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic”, and the double-D symbol are registered trademarks of Dolby Laboratories.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks

of HDMI Licensing LLC.

Manufactured under license from Audyssey Laboratories. U.S. and foreign patents pending. Audyssey

MultEQ XT is a trade-mark of Audyssey Laboratories.

This product incorporates copyright protection technology that is protected by method claims of

certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and

other rights owners. Use of this copyright protection technology must be authorized by Macrovision

Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized

by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

REFERENCE

SPECIFICATIONS

ENGLISH

ANÇ

AIS

ESP
AÑOL

ALIANO

DEUT

SCH

NEDERL

ANDS

SVENSK

РУ

ССКИЙ

Содержание M17







































Результаты поиска

Содержание M17

Отзывы:

Похожие инструкции для M17

Бренды по названию

Популярные бренды

NAD M17, Руководство пользователя

Результаты поиска

Содержание M17

Отзывы:

Похожие инструкции для M17

Бренды по названию

Популярные бренды