SUMMARY OF THE HTRM 2 MODES
Mode
Keys To Press (for 3 seconds)
Learn/Copy/Punch Through
Device Key + RES Key
Delete Mode
Device Key + RTN Key
Macro Record
Macro Key + Function Key
Library Mode
Device Key + [A/V PSET] Key
Back Light Timeout
DISP Key + Digit Key
Factory Reset
See “Factory Reset” above
SLEEP MODE
The Sleep Mode timer will switch the M17 to Standby mode automatically
after a preset number of minutes. Pressing the HTRM 2’s SLEEP button once
will display the setting of the sleep time increment. Pressing the HTRM 2’s
SLEEP button a second time within a 3-second period will change the
sleep time increment in 15-minute intervals, after which time the M17 will
automatically switch into Standby mode.
To adjust the sleep delay, press the HTRM 2’s SLEEP button twice; first
to display the sleep time increment, and a second time to change the
sleep time increment. The sleep time increment and a “SLEEP” icon will
continuously display on the M17’s front panel Vacuum Fluorescent Display
(VFD). Each consecutive press increases the sleep time in 15-minute
increments from 15 to 90 minutes. To cancel the sleep mode, continue
pressing the HTRM 2’s SLEEP button until “Sleep Off” displays on the VFD.
Switching the M17 to standby from either the HTRM 2’s OFF or the M17’s
STANDBY button will also cancel the sleep mode
USING THE ZR 7 REMOTE CONTROL
The ZR 7 is a discrete compact remote for controlling the Zone 2 feature of the
M17. Irrespective of the main room/zone settings, the ZR 7 allows full separate
control of the Zone 2 source selection among other applicable features.
1 ON/OFF:
Switch ON/OFF the Zone feature.
2 SOURCE [
d/f
]:
Select the active input of the NAD M17 that will be
sent out to the corresponding rear panel ZONE 2 output port.
3 MUTE:
Temporarily switch OFF or restore the Zone Volume level.
4 VOLUME [
d/f
]:
Increase or decrease the loudness level of selected
Zone source. This is possible only if the VOLUME setting of ZONE 2
CONTROLS is set to VARIABLE.
5 PRESET [
a/s
]:
Step up or down between stored radio presets. This
control button is possible if the selected Zone is “TUNER” and the active
tuner section has stored presets. This control button is not applicable to
M17.
6
The following CD Player Zone buttons can control a compatible CD
Player. The CD Player has to be powered ON and disc loaded.
SKIP [
9
]:
Go to the beginning of a track/file or previous track/file.
SKIP [
0
]:
Go to the next track/file.
[
4
]:
Start playback.
NOTE
The ZR 7 remote control will only control Zone 2 applications. Zone 3
and Zone 4 could be configured and managed at the appropriate
Zone OSD menu using the front panel navigations keys as well as
the corresponding keys on the HTRM 2 remote control. The HTRM 2’s
‘CUSTOM’ device is also defaulted to Zone 2 remote control codes.
OPERATION
USING THE HTRM 2 REMOTE CONTROL
1
3
4
6
2
5
34
ENGLISH
FR
ANÇ
AIS
ESP
AÑOL
IT
ALIANO
DEUT
SCH
NEDERL
ANDS
SVENSK
A
РУ
ССКИЙ
