CONNECT TO BLUETOOTH DEVICE
Pair Bluetooth device with the unique device ID of D3020 (D 3020 010DD3 in
this example). Upon successful pairing, select BT as a source and start music
playback from your Bluetooth device.
ABOUT aptX®
A Bluetooth connection is a bit like a data pipeline between devices.
Because the pipeline has a maximum width, it can sometimes be difficult
to flow large audio files through it. aptX® enables CD-like quality wireless
audio by solving the problem of sending the full music bandwidth over
Bluetooth. aptX® has revolutionised the Bluetooth listening experience
by significantly reducing the bit rate without affecting audio quality or
introducing latency issues. D3020 supports aptX®.
AUTO SENSE
Auto sense feature enables the D 3020 to wake up from standby mode and
starts operation by selecting OPTICAL 1 source or the last digital source
before going to standby mode.
CONDITIONS FOR AUTO SENSE
•
For Auto Sense to work, Auto Standby must be set to ON with D 3020
going first to standby mode.
•
If IR Learning with TV remote control is successfully completed and with
D 3020 going to standby mode, auto sense is activated upon detection
of active digital input only from OPTICAL 1 input.
−
With this condition, D 3020 wakes up and automatically switches to
OPT1.
•
If no IR Learning is conducted, auto sense is activated upon detection
of active input from the last source (limited only to the digital sources)
before the D 3020 goes to standby mode.
−
With this condition, D 3020 wakes up and automatically switches to
the last selected digital source prior to the D 3020 going to standby
mode.
ENABLE AUTO SENSE MODE
•
While at standby mode, press and hold “
4
” button of the D 3020 remote
control until
o
and
S
icons at the top screen wake up and blink once.
DISABLE AUTO SENSE MODE
•
While at standby mode, press and hold “
4
” button of the D 3020 remote
control until
o
and
S
icons at the top screen wake up and blink twice.
FEET INSTALLATION GUIDE
The dome-shaped feet are supplied for optional installation. Install the feet
as per suggested locations below. You may generate a template for proper
placement of the feet.
NOTE
• The feet can only be installed in the format shown above.
• Ensure that with the feet installed, the D 3020 is stable, balanced and
will not tip over.
OTHER FEATURES
184,5
58,0
185,8
185,8
^
8
ENGLISH
POR
TUGUÊS
FR
ANÇ
AIS
ESP
AÑOL
IT
ALIANO
DEUT
SCH
NEDERL
ANDS
SVENSK
A
РУ
ССКИЙ
