Nac HotShot, Руководство пользователя

Страница: 22 / 44

22
Record Controls
Use this … To do this…
Memory Segment Set the memory segment in use.
Frame Rate
Set the Frames Per second (Pictures Per Second)
Shutter Set the Shutter Speed (Exposure Time)
Trigger To Set the Trigger Mode
Trigger Frame Sets the number of “Pre Trigger frames” when using a
custom trigger
Low Light Mode Switch the camera to Low Light Mode. In View Mode
the camera will operate at the equivalent of 1/60
Shutter regardless of settings. This is used to set up the
view without the need for bright lighting
sVGA Out Switch ON and OFF the sVGA out signal from the
camera head.
White Balance Set the White balance. Select from the Drop down list.
If you select CUSTOM then you should push the
button ( ) and then click the image to set the white
balance at the clicked pixel
Gain Set the Gain. Increasing the gain will assist with low
light situations but it will begin to introduce noise if
used above 6dB.
Gamma Sets the gamma from with either 1, 1.8 or 2.2
Notes once a recording has been made the ‘Record info’ settings are ‘disabled’ and
cannot be changed. To re-enable them you must put the camera back into VIEW
mode.
WARNING: This will ERASE any recording already made.
The Trigger
When armed the system in constantly recording in a loop. The trigger is used to STOP
recording. A start trigger would have the effect of recording “one more entire
memory” and then stopping recording. An end trigger would have the effect of
stopping recording immediately. A centre or custom trigger would be somewhere