Chapter 4
Preparations for installation
16
4.3.3. Label indication
A label is attached to the main unit of this product.
4.4. Lifting of this product
• When lifting the product, use the tap holes for the hanging bolts described in the separately provided
“Outer dimensions” drawings and specifications.
• Do not enter the area under the reduction gear when lifting the reduction gear.
• When lifting the reduction gear, be sure to use a lifter that can withstand the weight of the reduction
gear.
• For the weight of each product, refer to the separately provided “Outer dimensions” drawings and
specification sheet.
Do not enter the area under the reduction gear when lifting the reduction gear. If the reduction gear
falls down, it could cause injury.
When lifting the reduction gear, be sure to use a lifter that can withstand the weight of the reduction
gear. Otherwise, the lifter will be damaged, and the reduction gear could fall down and topple over,
which may result in injury.
For types D, E, and H (Figs. 2-4, 2-5, and 2-8) described in the section of “2.1. Name of each
section”, the hollow section at the center of the reduction gear main unit is not structured to support
the load. Be sure that no load is applied to the hollow section when lifting. Otherwise, it could cause
injury to the workers, damage or fall of the reduction gear, or leakage of the lubricant. In addition, the
oil seals for the hollow section may be deformed, which could eventually cause leakage of the
lubricant.
Note
Model
Company logo
Serial number
Fig. 4-5
Logo of Precision Reduction Gear RV
QR code
(Reading this QR code will display our
Website URL and the serial number.)
