Chapter 7 Operation
40
The reduction gear could be extremely hot during operation. After stopping the operation, never
touch the reduction gear until it is completely cooled. Touching the reduction gear could cause
burns.
Do not operate the reduction gear under a condition that exceeds the allowable
acceleration/deceleration torque, allowable moment, and allowable output speed. Otherwise, it
could cause injury to the workers and damage to the reduction gear.
Operate the reduction gear while the surface temperature is below 60°C. Failure to do so could
cause premature damage.
When the reduction gear is used with the surface temperature within 40 to 60°C, refer to “8.3.1
Replacement period of lubricant”.
Note
