GM Series
TM19040 P.9/31
2.2. Storage of GM
NOTICE
When storing the product, follow the same packing condition as before unpacking.
If the packaging conditions change, foreign matter may enter inside or rust may occur.
To avoid rust, corrosion, and deterioration of seals, avoid storage in places such as:
•
Places where the surrounding temperature is under -10°C or over 40°C (Temperature
recommended as the storage environment)
•
Places of high humidity
•
Places with direct sunlight
•
Places where dew may condensate or freeze
•
Outdoors with wind and rain directly
•
Places near chemical substances such as an organic solvent, acid, and alkali
•
Places exposed to corrosive gas and/or dust
•
Places with unstable flooring
•
Places where the floor strength is insufficient
•
Places under vibration
NOTE
When the product is used or re-operated after a long-term, check the following:
•
That there is no rust or corrosion;
Although GM has antirust oil applied to the outside before shipping, check the antirust state
at least once a year. Take an antirust measure as necessary. The antirust state before
shipping will be maintained for approx. twelve month.
•
That seal parts has not been deteriorated over time.
•
That lubricant has not leaked.
