Nabtesco ALLUX NE-Z41, Руководство пользователя

Страница: 29 / 44

22
ALLUX
TM
User’s Guide
7.1.2 Charging procedure
Connect the battery charger（ NE-BC01）and AC adapter (NE-AD01) to charge from an indoor
household power supply outlet. Although the charging time depends on the residual battery
capacity, the battery will be fully charged after about 3 hours. Four types of plug adapters are
available for the AC adapter. In Japan, use the type A (NE-PAXX). The type C (NE-PA02), type
BF (NE-PA03) and type O (NE-PA04) can be supplied to each contries in accordance with the
proper configulation.
● Fit the plug adapter (type A) to the AC adapter as shown in the following figure.
* When they are fitted normally, a snap will be heard.
* To remove the adapter, slide it while pressing the center pawls.
● Connect the battery charger and AC adapter.
● Insert the plug adapter of the AC adapter to a commercial power supply.
* For connection to a supply not in the U.S.A., use an attachment plug adaptor of the proper
configuration for the power outlet, if needed.
● Remove the Charging port cap (NE-CC01) of ALLUX
TM
.
● Remove it sliding the connector cover lever in the arrow direction.
● Connect the battery charger connector to the connector terminal of ALLUX
TM
.
The vibration will sound continuously for 2 seconds.
■ Do not charge if the plug adapter is not fitted correctly.
■ Do not use any adapter other than the supplied plug adapter.
Could result in a malfunction.
NOTICE
Connector cover Connector terminal Battery charger connector
Charging Procedures
7
7
Charging Procedures