Nabtesco ALLUX NE-Z41, Руководство пользователя

Страница: 21 / 44

14
ALLUX
TM
User’s Guide
6
States of ALLUX
TM
6.2.3 Use of backup battery pac
When the internal battery capacity allows for less than 3 hours of walking, the warning vibration
will be activated. When the battery is exhausted, the control of ALLUX
TM
will be stopped.
Connecting the backup battery pac (NE-SB01) before the internal battery runs out enables the
user to use ALLUX
TM
continuously for one day.
0.5
sec×
8
times
● Remove the Charging port cap.
● Fit the backup battery holder (NE-SC01) containing the backup battery pac on the body of
ALLUX
TM
or the lower leg side of the armoring, such as the foam cover, and secure it with the
Velcro tape.
● Connect the backup battery pac to ALLUX
TM
.
* ALLUX
TM
will enter the normal mode stated in 6.2.1, and the vibration for confirmation of
backup battery pac capacity will sound.
0.25
sec×
8
times
：3hours or more
0.5
sec×
8
times
：Less than 3hours
0.75
sec
8
times
＋ (4
sec
) ：No more walk
* The backup battery pac must be charged.
■ Connect the backup battery pac in a state where the safe posture can be
ensured.
Flexion/extension resistance may suddenly change, leading to a fall.
■ Do not secure the backup battery holder on the thigh side (above ALLUX
TM
).
The cable may be caught between knee joint parts or damaged
during flexing action, and an excessive load may be applied to the
connector, thereby disconnecting the cable.
■ Secure the backup battery holder on a side of ALLUX
TM
body(Frame).
The socket and backup battery pac may get into contact at the maximum
flexion angle, and the backup battery pac may be damaged.
■ Do not insert or remove the backup battery pac while walking as it may
lead to a fall.
* If the cable is disconnected or the battery is damaged during walking, the
user cannot walk normally and may fall.
Attach backup battery pac and the
cable carefully
so as not to get it caught
when ALLUX
TM
is flexed.
WARNING
States of ALLUX
TM
6