Omega Dimmer series User manual version 1.0 09.2011
13
User MENU setup.
Press and hold
[MENU]
button
for 3 seconds to
enter
USER MENU SETUP
.
"DMX address set"
- DMX address setup. For numerical parameter setup, use rotary encoder, or
buttons
[UP]
and
[DOWN]
- addresses changes in the value of + / - 1. Press
[MENU]
-
to confirm planted DMX address.
"Test"
–
Channel Output editor regardless of the DMX input.
Button functions:
[LEFT], [RIGHT]
-
chose next channel or add channel to the group.
[UP]
– change (C) channel or (G)roup mode,
[MENU], [DOWN]
–
leave the Test mode
All output levels change with encoder.
In Test mode channel output levels stays only at test mode, if you exit from Test mode, output levels are
dropped down.
"Chase"
–
pre-recorded step chase playback and editing. Contains the following functions (which
may be added):
"Reset"
–
reset all chases to manufacturer defaults;
"Run"
– start chase, chose one of 6 preprogrammed chases.
"Chase"
No.
#0
is
background output channel levels. Use butons
[LEFT], [RIGHT]
to chose
"Chase"
number
. Use encoder to set speed and drirection of each "Chase".
"Loop"
– automaticly change
"Chase"
each 20 seconds (except #0, because it is
background channel levels) ;
c # 3
s + 1 0
Shows value of channel our group 0 - 255
Channels (c) or
channel group
(G) label.
Chase selection 1 - 5
Chase speed selection 0 - +/-99
Channels (c)
or channel
group (G)
label.
Chase selection 1 - 5
