Troubleshooting
Refer to Table 4 below for troubleshooting instructions for most common problems. If the
equipment malfunction is not listed or actions listed do not correct the fault, please contact N-
Vision Optics.
Table 4 Troubleshooting Instructions
Malfunction
Test or Inspection
Corrective Action
Unit fails to turn ON.
Visually inspect. Check for
defective, missing or
improperly installed
batteries.
Inspect Battery
Compartment for damage.
Replace battery or install
correctly. Tighten Battery
Compartment Cover.
Flickering image or unit turns
off under light impact.
Visually inspect. Check for
loose Battery Compartment
Cover. Check battery
charge level.
Tighten Battery
Compartment Cover.
Replace battery, if
necessary.
The ATLAS is ON but there
is no thermal image on the
display
Visually inspect. Check if
the Lens Cover is on or
something else obstructs
field of view.
Remove Lens Cover or other
obstruction.
Poor image quality.
Visually inspect. Check for
fogging or dirt on the
Objective Lens or Ocular.
Clean optics. See
maintenance section of this
manual.
