N-Com bluetooth kit multi, Инструкция по эксплуатации

Страница: 24 / 40

24
used to stop and restart music reproduction. If the A2DP receiver is not
equipped with the AVRCP protocol, it may not be possible to restart
music reproduction from the Bluetooth kit MULTI (although it is possible
to stop it). In this case reproduction must be restarted manually on the
receiver.
Connect A2DP
receiver
Press the “

” button and keep it pressed for 2
seconds (beep). After connection is established,
some receivers start the audio reproduction
automatically.
Start music
reproduction
(Play)
Press the “

” button and keep it pressed for 2
seconds (beep).
Pause function
(Pause) When the receiver is connected and playing
music, press the “

” button and keep it pressed
for 2 seconds (beep).
Next track
(Skip ) When the receiver is connected and playing
music, press the “

” button and keep it pressed
for about 4 seconds (beep).
Stop playing music
(Stop)
Turn off receiver
Press the “

”button and keep it pressed for 2
seconds (beep). Music reproduction stops and
the A2DP receiver is disconnected.
N.B.: If the A2DP receiver is also a cell phone,
connection to the cell phone is still working even
if the receiver is disconnected.
N.B.: The Bluetooth interphone cannot be used while listening to an A2DP
audio source.