N-Com bluetooth kit multi, Инструкция по эксплуатации

Страница: 12 / 40

12
N.B.: Do not tighten the screw excessively in order to avoid damage to the
system components.
Caution: In case the polystyrene support is damaged during the operation,
contact your local dealer for its replacement.
3.2.
Fixing with adhesive support
In case it is not possible to use the pliers to secure the system to the
helmet, you can use the adhesive support instead.
Caution: Once the adhesive is applied, it cannot be reused in a different
position and will have to be replaced once removed. Use this fixing
method only in situations where it is not possible to secure the system
with the pliers.

Unscrew the screw completely and remove it from the system.

Remove the adhesive rubber (if already in place) and insert the adhesive
plate in the wired support until you hear it click (fig. 4a-4b).
Fig. 4a Fig. 4b