N-Com bluetooth kit multi Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 40

background image

FOR USA MARKET ONLY: SPECIAL WARNING

This  device  complies  with  part  15  of  the  FCC  Rules.  Operation  is  subject  to  the
following two conditions: (1) This device may not cause harmful interference, and (2)
this  device  must  accept  any  interference  received,  including  interference  that  may
cause undesired operation.

Changes  or  modifications  not  expressly  approved  by  the  party  responsible  for
compliance could void the user’s authority to operate the equipment.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized
modifications to this equipment. Such modifications could void the user’s authority to
operate the
equipment.

RF Exposure closer than 20 cm antennas cannot be co-located.

This product has been tested and complies with the specifications for a Class B digital
device,  pursuant  to  Part  15  of  the  FCC  Rules.  These  limits  are  designed  to  provide
reasonable  protection  against  harmful  interference  in  a  residential  installation.  This
equipment  generates,  uses  and  can  radiate  radio  frequency  energy  and,  if  not
installed  and  used  according  to  the  instructions,  may  cause  harmful  interference  to
radio communications. However, there is no guarantee that interference will not occur
in a particular installation.
If  this  equipment  does  cause  harmful  interference  to  radio  or  television  reception,
which is found by turning the equipment off and on,  the user is encouraged to try to
correct the interference by one or more of the following measures:



Reorient or relocate the receiving antenna



Increase the separation between the equipment or devices



Connect the equipment to an outlet other than the receiver’s



Consult a dealer or an experienced radio/TV technician for assistance

«
1
2
3
4
...
»

Содержание bluetooth kit multi









































Отзывы:

Нет отзывов

Похожие инструкции для bluetooth kit multi

Бренд: fadini Страницы: 16

Бренд: QSC Страницы: 4

Бренд: WAREMA Страницы: 4

Бренд: Balboa Страницы: 23

TVNext NN01-054

Бренд: Fractus Antennas Страницы: 14

MorphoAccess VP MD

Бренд: Idemia Страницы: 29

Бренд: Hame Страницы: 26

RealPresence Group 700 system

Бренд: Polycom Страницы: 2

IntelliGate 2025

Бренд: Aastra Страницы: 71

Бренд: Globalmediapro Страницы: 11

Бренд: Aiwa Страницы: 28

Zynq UltraScale+

Бренд: Xilinx Страницы: 86

EtherNet/IP E84DGFCGEJP

Бренд: Lenze Страницы: 149

Бренд: Raven Страницы: 104

Бренд: Sharp Страницы: 2

Бренд: Sharp Страницы: 28

Бренд: Lava Страницы: 23

Бренд: Pioneer Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды