N-Com bluetooth kit multi, Инструкция по эксплуатации

Страница: 13 / 40

13

Remove the protective film from the Adhesive Plate and apply the Plate
to the helmet, making sure the entire surface of the adhesive sticks
perfectly to the shell.
N.B.: In case the adhesive plate is not in the right position, peel it off
immediately from the helmet and repeat the positioning.
N.B.: It will take up to 24 hours for the adhesive to stick completely.
During this time, do not expose the helmet to atmospheric agents.
During the first 12 hours, do not apply the e-box MULTI.
Fig. 5

Thoroughly clean the outer surface of
the shell to ensure that the Adhesive
Plate sticks properly. Before gluing,
make sure the shell is dry and free from
oil or dirt.

Before you glue the Adhesive Plate to
the helmet, determine the right spot
where
the e-box MULTI will be
positioned, making sure that the
microphone ends up precisely in front of
the rider’s mouth (fig 5).