N-Com basic kit 2, Инструкции пользователя и правила безопасности

Страница: 26 / 32

26
6. USING OTHER AUDIO PERIPHERAL DEVICES
The N-Com Basic Kit2 is pre-set for listening to various audio devices, which must be
connected through the special Multimedia Wire cable (sold separately).
You can listen to an MP3 or to an FM radio, connect to a satellite navigation system, to
the audio system of your motorcycle or to a radio for communication between two
motorcycles.
Refer to the list of Multimedia Wire cables and the possible connections available on
the website www.n-com.it
Fig. 41
Connect the 3.5 mm 4-pole connector of the
Multimedia cable to the input connector (IN – see
fig. 41). Connect the other end of the cable to the
audio device.
A coloured clamp on the cable indicates the
connector to hook up to the audio peripheral
device.
7. MAINTENANCE
The N-Com does not require any special maintenance tasks. In case you use the kit
when it rains, remove the e-box from its housing and dry it with warm air. Wipe dry
the outside of the helmet when wet, especially in the contact area.
In case the kit gets wet several times, rust or corrosion may form, thus hindering the
electrical contact. In these cases, it is recommended to clean the contacts of the
socket on the shell and on the e-box using alcohol or another antirust product.