N-Com basic kit 2, Инструкции пользователя и правила безопасности

Страница: 16 / 32

16

Remove the rear part of the comfort padding, pulling on the neck roll until it
separates from the shell.

Temporarily put the padding back inside the helmet (fig. 22) or remove it
altogether to facilitate the ensuing operations.
Prepare the Basic Kit2 for assembly (fig.23). The left side of the Basic Kit2 is the one
equipped with microphone, and it has to be positioned inside the helmet on the side of
the cover that has just been removed.
Fig. 24 Fig. 25

Pass the chin strap, right side and left side, through the hole in the Basic Kit2
and position the kit in contact with the shell. Caution: do not push it in all the
way for now. (fig. 24)

Position the cable behind the tabs of the comfort padding frame. (fig. 25).